Troubleshooting; Ec Declaration Of Conformity; Technical Data - Black+Decker BEHTS301 Traducción De Las Instrucciones Originales

ENGLISH

Troubleshooting

Problem Possible Cause
Slow Dry, corroded blades.
running,
noisy or hot Blades or blade
blades. support bent.
Bent or damaged
teeth.
Loose blade bolts.
Unit will not Lock off not fully
start. operated.
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is
tripped.
Cord or switch is
damaged.

Technical data

Voltage V
AC
Power input W
Blade strokes (no load) min
-1
Blade length cm
Blade gap mm
Blade brake time s
Saw blade Max cut mm
Weight kg
Voltage V
AC
Power input W
Blade strokes (no load) min
-1
Blade length cm
Blade gap mm
Blade brake time s
Saw blade Max cut mm
Weight kg
Level of sound pressure according to EN 60745:
Sound pressure level at operator position (L
Sound power level (L ) 98 dB(A), uncertainty (K) 2.0 dB(A)
WA
8
(Original instructions)
Possible Solution
Lubricate blades.
Straighten blade or blade support.
Straighten teeth.
Tighten blade bolts.
Check that lock off is fully forward
prior to moving main trigger.
Plug cord into a working outlet.
Replace circuit fuse.
(If the product repeatedly causes the
circuit fuse to blow, discontinue use
immediately and have it serviced at a
BLACK+DECKER service center or
authorized servicer.)
Reset circuit breaker. (If the
product repeatedly causes the circuit
breaker to trip, discontinue use
immediately and have it serviced at a
BLACK+DECKER service center or
authorized servicer.)
Have cord or switch replaced at
BLACK+DECKER Service Center or
Authorized Servicer.
BEHTS301 Type 1 BEHTS401 Type 1
230
500
1850
50
22
<1
35
2.47
BEHTS451 Type 1 BEHTS501 Type 1
230
550
1870
60
25
<1
35
2.65
) 89 dB(A), uncertainty (K) 3.5 dB(A)
pA
Vibration total values (triax vector sum) according to EN 60745:
Vibration emission value (a

EC declaration of conformity

OUTDOOR NOISE DIRECTIVE
BEHTS301, BEHTS401, BEHTS451, BEHTS501 – Hedge
Black & Decker declares that these products described under
"technical data" are in compliance with:
EN 60745-1:2009 +A11:2010, EN 60745-2-15:2009 +A1:2010
2000/14/EC, Hedge trimmer, Annex V
Measured sound power level (L
Guaranteed sound power (L
These products also comply with Directive
2006/42/EC, 2014/30/EU and 2011/65/EU.
For more information, please contact Black & Decker at the
following address or refer to the back of the manual.
230
500
The undersigned is responsible for compilation of the technical
1835
file and makes this declaration on behalf of Black & Decker.
55
22
<1
Black & Decker Europe, 210 Bath Road, Slough,
35
2.54
230 Guarantee
600 Black & Decker is confident of the quality of its products and
offers consumers a 24 month guarantee from the date
1840
of purchase. This guarantee is in addition to and in no way
60
prejudices your statutory rights. The guarantee is valid within
25
the territories of the Member States of the European Union
<1
and the European Free Trade Area.
35
To claim on the guarantee, the claim must be in accordance
2.65
with Black & Decker Terms and Conditions and you will need
to submit proof of purchase to the seller or an authorised
repair agent. Terms and conditions of the Black & Decker 2
year guarantee and the location of your nearest authorised
repair agent can be obtained on the Internet at www.2helpU.
) 4.1 m/s , uncertainty (K) 2.1 m/s
2 2
h, D
MACHINERY DIRECTIVE
Trimmer
) 98 dB(A)
wA
Uncertainty (K) 2,0 dB(A)
) 100 dB(A)
wA
Technical Director
Berkshire, SL1 3YD
A. Smith
United Kingdom
22/01/2019