®
R&S
TS-PMB
4 Layout
4.1 Mechanical Layout
The R&S TS-PMB is designed as a long plug-in board for front mounting in the TSVP
chassis. The mounting depth is 300 mm, and the front panel is 4U in height.
Connector X20 is used to make the connections with the cPCI backplane/control back-
plane of the TSVP. Connector X30 connects the R&S TS-PMB with the analog bus
backplane in the TSVP chassis. UUTs and peripherals are connected using front con-
nector X10.
Figure 4-1: Layout of Connectors and LED's
Table 4-1: Connectors on the R&S TS-PMB
Symbol
X1
X10
X20
X30
4.2 Display Elements
The front panel of the R&S TS-PMB contains three light-emitting diodes (LED's) with
the following functions:
User Manual 1153.5233.12 ─ 05
Use
cPCI Connector (starting with Version V3.x)
Front Connector
Extension Connector
Analog Bus Connector
Layout
Display Elements
7