Transmitter
Transmission power CB
Achievable power after
Amateur radio modification
(only licensed amateur radio operators)
Harmonic suppression
Microphone sensitivity
Supplied microphone:
Dynamic control range microphone-ALC
Power consumption during transmission
Receiver
Receiver sensitivity
Receiver neighbor channel selection
Clarifier control range
Steps setting range
NF output power at 10% distortion factor
Dimensions incl. protruding knobs/jacks
Weight
© Alan Electronics GmbH 2012
This documentation is not to be copied or duplicated for commercial purposes, entirely or in parts, without the
written authorization of Alan Electronics GmbH.
AM
FM
SSB
AM
FM
SSB
10 m Band
for 12dB SINAD
12
1 Watt / 4 Watts depending on country
max. 4 Watts
max. 4 or 12 Watts PEP depending on country
approx. 6 Watts effective
approx. 15-25W effective
approx. 15-25W PEP
28.000 – 29.7MHz
min. 90dB (4nW)
approx. 4mV / 1 kOhm (Mic Gain 10 level)
Electret with integrated pre-amp
50dB
max. 2.5 (AM)
max. 3.0A (FM, SSB)
0.5µV EMK FM/SSB
0.9µV EMK AM
60dB FM/AM
70dB SSB
+/- 1kHz
up to 500Hz/step
min. 6 Watts, 4 Ohm
min. 4 Watts, 8 Ohm
24.5 x 15.5 x 5.3 cm
1.3 kg