Operating The Appliance; Switching Off; Switching On; Power Stage - CASO DESIGN Master E2 Manual De Instrucciones

15.4 Operating the Appliance

15.4.1

Switching Off

15.4.2

Switching On

15.4.3

Power Stage

15.4.4

Timer

caso Master E2
The complete appliance is switched off using the Master
On/Standby switch (1).
► Note that the appliance's fan continues to operate for a while
after the appliance has been switched off in order to dissipate the
heat that has built up in the appliance.
Press the Master On/Standby switch (1), the keys light up and
an acoustic signal sounds. Now the device is in standby mode.
Place a suitable cooking pot with its contents to be cooked on the
centre on the hob (Ø 140 mm - 180 mm). Now select the
appropriate hob with the selection button (3).
Press the selection key +/- (2) as long as necessary to select
the power stage (Indicator lamp showing correct power stage).
The preset power stage "5" is selected and the device turns on.
With the + / - Keys (2), you can change the settings at any
time in a range from 1 – 9.
If you press both selection buttons + / - Keys (2)
simultaniously, the power stage "0" will be selected.
After selecting the power level, select the timer button (4).
The display shows the number "0". With the + / - keys (2), you
can now select the operating time in 1-minute intervals (up to
max. 99 minutes).
If you press the the + / - keys (2) longer, you can select the
operating time in 10-minute intervals.
If you press + and – simultaneously, the timer starts at "00".
Once the time is up, an acoustic signal sounds and the device
automatically goes into standby mode.
► During timer operation, you can change the duration at any
time with the + / - keys (2). With the memory function of the
device, the power stage remain unchanged here.
► During the cooking process the power level and timer can be
readjusted as you wish.
► The timer can only be set/changed as long as the power level
flashes
Please note
Please note
56