ENGLISH
STARTING THE AIR CONDITIONER cont.
FILTER RESET
This feature automatically notifies you that the air filter must be cleaned. The indicator light will
come on after 240 hours of operation. Clean the air filter (refer to Care and Cleaning), place it back
in the front panel, and press the Filter Reset button. The light will turn off.
USING THE REMOTE CONTROL
NOTE: The raised dots are Braille for the visually impaired. (See Fig.22)
Remote control may differ in appearance from the image shown.
NOTE: Remove and discard protective film prior to use. The remote control runs
on one CR2025 battery (included). Replace battery after 6 months of use,
or when the remote control starts to lose power. To change battery, first
remove screw on back panel of remote.
POWER
Pr
ess ON/OFF to turn on the air conditioner.When you first press the ON/OFF
button, the air conditioner will operate in Energy Save mode, low fan speed and
temperature of 72°F. You can select any other mode to satisfy your needs.
Mode
Press MODE to choose Fan, Energy Save, Cool or Dehum.
Speed
Press SPEED to choose High, Med, Low or Auto Cool.
TIMER
To set the air conditioner to turn off after a set amount between 1 hour and 24 hours (unit must
be ON):
1. r P ess TIMER. Timer OFF indicator light on the air conditioner control panel will flash.
2. r P ess the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24
hours.
3.
A
t f
r e
5 seconds, Timer OFF indicator light on the air conditioner control panel will remain on.
TO SET TIMER TO TURN ON THE AIR CONDITIONER, KEEPING PREVIOUS SETTINGS:
1. Turn on the air conditioner.
2. r P ess TIMER. Timer On indicator light on the air conditioner control panel will flash
3. r P ess the TEMP/TIME up or down arrow button to change the delay time from 1 hour to 24
hours.
4.
A
t f
r e
5 seconds, Timer On indicator light on the air conditioner control panel will remain on.
PAGE 18
USING YOUR AIR CONDITIONER
ON/OFF
MODE
SPEED
TIMER
TEMP/TIME
TEMP/TIME
Fig. 22