Pizza Cooking Procedure; Pizza Baking Tips - Monogram ZEP30FLSS Manual Del Propietário

COOKING INSTRUCTIONS

PIZZA COOKING PROCEDURE

1. Turn power ON by pressing the Power Switch.
2. Select a pre-set cooking profile. Some pre-set cooking
profiles include Detroit, Flatbread, Neapolitan, New
York, and Custom. For instructions explaining how
to setup a custom profile, please see the Creating a
Custom Profile section.
3. Touch Preheat to begin heating the oven. Pre-heating
varies by profile, but typically lasts about 30 minutes.
The progress indicator on the display will allow you to
monitor pre-heating status and a chime will sound when
pre-heating is complete.
4. Insert pizza using the wooden pizza peel and touch
Start to begin cooking timer. Halfway through the
cooking cycle, a reminder chime will sound indicating it is
time to rotate the pizza using the metal pizza peel. When
the pizza is almost done cooking, a second reminder
chime will sound. At this time, pizza is almost ready for
removal. When timer is complete remove the pizza from
oven using the metal pizza peel.
NOTE: Cooking timer and reminders may be modified
based on personal preference. For instructions on
customizing cooking profiles, see the Creating a Custom
Profile section.
5. When you are done with your cooking session, turn the
power OFF using the Power Switch.
NOTE: The oven may remain hot for several hours
after the power has been turned off. The fan will
switch to a lower speed and may run for up to 50
minutes.

PIZZA BAKING TIPS

the pizza slide off.
so may create smoke.
crust.
be room temperature in order to cook properly.
49-80785 Rev. 2
oven.
inserting a pizza.
9