Pipette Kit; Spare Parts And Accessories - HTL LABMATE pro LMP2 Manual De Instrucciones

11 - PIPETTE KIT

The pipettes are delivered in the kits including:
• Pipette
• CD
• Short instruction manual
• Calibration key
• Ejector cap (for pipette models LMP10000)
• Pipette hanger
• Lubricant
Note:
The following parts are not part of the standard equip-
ment of the pipette and are available upon request:
• Ejector cap (for pipette models LMP2, LMP10,
LMP5000)
• Filters (for pipette models LMP5000, LMP10000)
• Color identification rings (for pipette models LMP2-
LMP1000)
15

12 - SPARE PARTS AND ACCESSORIES

All the spare parts and accessories indicated in Fig. 1, 3,
4 and 6:
A: Pipetting pushbutton
B: Adjustment knob
C: Shaft
D: Ejector
F: Shaft nut
G: Piston assembly
I: O-ring
J: Seal
K: Calibration key
L: Filter
M: Ejector cap
N: Ejector pushbutton
Spare parts and accessories can be ordered from your
HTL representative (type of pipette and name of the part
for this pipette should be specified).
Warning: The replacement of the piston requires
conducting of calibration procedure according to
section 8.
All rights reserved. Product described in this manual is subject to availability
and technical modification. Errors excepted.
PZ HTL S.A. reserves the right to improve, enhance or otherwise modify its
products without prior notification.
© 2015 PZ HTL S.A.
ENGLISH
A1: Pushbutton A2: Knob
16