Menu Setup; Display Brightness - Bushnell Pro X7 Jolt Manual De Instrucciones

Golf Example: Let's say you are a strong golfer with a 300 yard shot. At a 20 degree slope the Pin would be 50 feet
above you. In other words, you be driving the ball to the top of a 5 story building!!!
NOTE: For your convenience, the Slope +/- Mode also contains the PinSeeker Mode/feature.
™ ®

MENU SETUP

DISPLAY BRIGHTNESS

Vivid Display Technology™ dramatically improves contrast, clarity and light transmission while increasing brightness
of the digital readout, making distance readings legible in low light environments. There are four intensity settings to
choose from and this is the first setting within the SETUP menu. Press the MODE button for 5 seconds to get into
the SETUP menu. The existing brightness setting will be flashing (i.e. BRT1, BRT2, BRT3, or BRT4), pressing the
MODE button will toggle between the four brightness settings. "BRT1" is the lowest intensity while "BRT4" is the
brightest. Simply press the MODE button until the desired brightness setting is displayed and select by pressing and
releasing the POWER button.
UNIT OF MEASURE OPTIONS
The Pro X7™can be used to measure distances in yards or meters. The unit of measure indicators are located in the
lower right portion of the VDT™. There are two measuring settings to choose from and this is the second setting
within the SETUP menu. Look through the eyepiece, depress the "MODE" button (left side of the eyepiece) and
hold it down for approximately 5 seconds to get into the SETUP menu. Depressing the MODE button will toggle
through the brightness settings. If you are changing from yards to meters, a change in unit of measure will be
indicated by the illumination of the M for meter indicator while the Y for Yard indicator is turned off. If you are
changing from meters to yards, the opposite will occur. The Pro X7™ will return to the last unit of measure setting
used each time the unit is turned on.
10