Saw Blades - Craftsman 5411.3 Manual Del Operador

This product will accept Craftsman 19.2V C3 lithium-ion battery packs. For
complete charging instructions, refer to the Operator's Manual for the battery
pack and charger.
_, WARNING: To prevent accidental starting that could cause serious personal
injury, always remove the battery pack from the tool when assembling parts,
making adjustments, installing or removing blade, cleaning, or when it is not
in use.
TO ATTACH BATTERY
PACK (Fig, 2)
Fig. 2
1. Ensure that the trigger switch is
in the "OFF" position.
2. Align the raised rib on the battery
pack with the groove inside the
circular saw, and then insert the
battery pack into the tool. Rib
NOTICE: Make sure that the
latch on the battery pack snaps Button
into place and the battery pack
is secured to the tool before
beginning operation. Improper
assembly of the battery pack can cause damage to internal components.
TO DETACH BATTERY
PACK (Fig. 3)
1. Ensure that the trigger switch is
in the "OFF" position.
2. Depress both battery-release
buttons, located on the sides of
the battery pack, to release the
battery pack.
3. Pull the battery pack out and
remove it from the tool.
Fig. 3
SAW BLADES
The best of saw blades will not cut efficiently if they are not kept clean, sharp
and properly set.
Using a dull blade will place a heavy load on the saw and increase the danger of
kickback. Keep extra blades on hand, so that sharp blades are always available.
14