Contents Of The Package; Accessory Installation - WEG CFW500 Guía De Instalación, Configuración Y Operación

CAN Communication Plug-in Module

3 CONTENTS OF THE PACKAGE

When receiving the product, check if this package
contains:
Accessory in anti-static packaging.
„
Installation, configuration and operation guide.
„

4 ACCESSORY INSTALLATION

The accessory is easily installed or replaced. For correct
installation of the accessory execute the following steps:
Step 1: With the inverter without power, remove the front
cover of the inverter
Step 2: Remove, if there, the old plug-in module as
in figure A.1 (a).
Step 3: Fit and press the plug-in to be installed as
indicated in figure A.1 (b)
cover of the inverter.
Step 4: Energize the inverter and check if the parameter
P0027 indicates the number 6 (P0027=6). If this information
is not true or the display of the HMI won't turn on, check
if the module used is actually the CFW500-CCAN, and
repeat steps 1-4.
6 | CFW500
(figure A.1 (a)).
and then connect the front