INSERTING A CARD
"Card" in this manual refers to the xD-Picture Card. The camera uses the card
to record pictures.
1
Make sure that:
• The monitor is off.
• The lens barrier is closed.
• The lamp on the right of the viewfinder is off.
2
Open the connector cover while
pressing the
illustration.
3
Open the card cover by
En
pulling the card cover
catch towards you.
4
Face the card the correct
way and insert it into the card
slot.
• Insert the card while keeping it straight.
• Inserting the card the wrong way or at an
angle could damage the contact area or
cause the card to jam.
• If the card is not inserted all the way,
data may not be written to the card.
5
Close the card cover.
12 En
mark in the
Card cover
Connector cover
Card cover catch
Index area side