Charging Procedure - Cramer 2900486 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
EN
SYMBOL
SIGNAL
CAUTION
CAUTION
Operation

Charging Procedure

NOTE: The battery is not shipped fully charged. It is recommended
to fully charge before use to ensure that maximum run time can be
achieved. This lithium-ion battery will not develop a memory and may
be charged at any time.
1
Charge one battery:
Plug the charger (1) into an AC power outlet.
Insert the battery pack (2) into the charger (1).
2
Charge two batteries:
Plug the charger (1) into an AC power outlet.
Insert two battery packs (2) into the charger (1).
When charging two battery packs, the two batteries are charged
separately. The charger will charge one battery first. After one battery is
4
cramer.eu
MEANING
Indicates a potentially hazardous
situation, which, if not avoided, may
result in minor or moderate injury.
(Without Safety Alert Symbol)
Indicates a situation that may result in
property damage.
fully charged, it will charge the other battery.
2
1
This is a diagnostic charger. The Charger LED Lights (3) will illuminate
in specific order to communicate the current battery status. They are as
follows:
LED STATUS
Blinking Green
Solid Green
Solid Red
Blinking Red
False defect note:
When the battery is inserted into the charger and the status LED blinks
RED, remove the battery from the charger for 1 minute, then reinsert.
If the status LED blinks GREEN, then the battery is properly charging. If
the status LED is still blinking RED, remove the battery and unplug the
3
DESCRIPTION
Charging
Fully Charged
Over Temperature
Charging Fault

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

82c2

Tabla de contenido