Description Of Symbols - Silverline 951855 Manual De Instrucciones

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual carefully
to ensure you fully understand the instructions. Ensure all users of the tool read and fully
understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information
about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Wear protective clothing
Read instruction manual
Toxic fumes or gases!
Caution!
Always disconnect from the power supply when adjusting, changing
accessories, cleaning, carrying out maintenance and when not in use!
Be aware of kickback!
Keep bystanders away!
DO NOT use for side grinding.
Beware of flying objects
Class II construction (double insulated for additional protection)
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or
retailer for recycling advice.
Conforms to relevant legislation and safety standards.
6
Original Instructions
Technical Abbreviations Key
V Volts
~, AC Alternating current
A, mA Ampere, milli-Amp
n0 No load speed
n Rated speed
° Degrees
Ø Diameter
Hz Hertz
, DC Direct current
W, kW Watt, kilowatt
/min or min Operations per minute
-1
rpm Revolutions per minute
dB(A) Decibel sound level (A weighted)
m/s Metres per second squared (vibration magnitude)
2
Specification
Voltage: ........................................................................................230V~ 50Hz
Power: .................................................................................................. 2400W
No load speed:................................................................................6000min-1
Disc diameter: ...................................................................................Ø230mm
Disc bore size: .....................................................................................Ø22mm
Maximum humidity: ..................................................................... 90% at 25°C
Operating temperature: ............................................................ -15°C - +40°C
Maximum operating height: ....................................... 1000m (above sea level)
Soft start: .................................................................................................... Yes
Spindle thread: ..........................................................................................M14
Ingress protection: .....................................................................................IP20
Protection class: .........................................................................................
Weight: ....................................................................................................4.3kg
As part of our ongoing product development, specifications of Silverline products
may alter without notice.
Sound and vibration information:
Sound pressure LPA: ........................................................................ 91.3dB(A)
Sound power LWA: ......................................................................... 102.3dB(A)
Uncertainty K: ............................................................................................ 3dB
Weighted vibration ah: .................................................................... 5.122m/s2
Uncertainty K: ...................................................................................... 1.5m/s²
The sound intensity level for the operator may exceed 85dB(A) and sound protection
measures are necessary.