Description Of Symbols - Silverline 263511 Manual De Instrucciones

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information
necessary for safe and effective operation of this product. This product has
unique features and, even if you are familiar with similar products, it is necessary
to read this manual carefully to ensure you fully understand the instructions.
Ensure all users of the tool read and fully understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
WARNING: Moving parts can cause crush and cut injuries.
Be aware of kickback!
Caution!
For indoors use only!
Class I construction (protective earth)
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with household
waste. Please recycle where facilities exist. Check with your local
authority or retailer for recycling advice
4
Original Instructions
Technical Abbreviations Key
V
Volts
A, mA Ampere, milli-Amp
n
No load speed
0
° Degrees
Ø Diameter
Hz
Hertz
W, kW Watt, kilowatt
/min or min
-1 Operations per minute
dB(A) Decibel sound level (A weighted)
m/s Metres per second squared (vibration magnitude)
2
Specification
Voltage ..............................................................................230V~, 50Hz
Power .......................................................................................... 150W
Wheel size ..........................................................ø150 x 16 x ø12.7mm
Supplied wheels: .......................................36 grit (coarse), 60 grit (fine)
No load speed ....................................................................... 2950min
Duty Cycle ...............................S2, short-time duty, 30min on/30min off
Protection class ..............................................................................
Ingress protection ...........................................................................IP20
Dimensions (L x W x H):..........................................300 x 210 x 210mm
Weight: .............................................................................................5kg
As part of our ongoing product development,
specifications of Silverline products may alter without notice.
Sound and vibration information:
Sound pressure L : ................................................................... 63dB(A)
PA
Sound power L : ...................................................................... 76dB(A)
WA
Uncertainty K:.................................................................................. 3dB
The sound intensity level for the operator may
exceed 85dB(A) and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A)
and limit the time of exposure if necessary. If sound levels are uncomfortable, even
with ear protection, stop using the tool immediately and check the ear protection is
correctly fitted and provides the correct level of sound attenuation for the level of
sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch,
numbness, tingling and reduced ability to grip. Long term exposure can lead to a
chronic condition. If necessary, limit the length of time exposed to vibration and
use anti-vibration gloves. Do not operate the tool with hands below a normal
comfortable temperature, as vibration will have a greater effect. Use the figures
provided in the specification relating to vibration to calculate the duration and
frequency of operating the tool.
Sound and vibration levels in the specification are determined according to
EN60745 or similar international standards. The figures represent normal use for
the tool in normal working conditions. A poorly maintained, incorrectly assembled,
or misused tool, may produce increased levels of noise and vibration.
www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods
of time.
-1