Sharp LL-S242A-W Manual De Instalación página 12

Portrait orientation
Run the cables along the hollow on the front side and out
between the legs of the back side.
7. Secure the monitor to the stand using the two fixing
screws.
Landscape orientation
Portrait orientation
10
E
Installation (Continued)
Fixing screws (supplied)
Fixing screws (supplied)
Installing on a table
(Pen writing position/Horizontal
position)
Remove the monitor from the stand and place face-down on a
table or other level surface.
Caution
• Do not exert a large amount of force on the monitor from
above. Doing so may damage the flap. (LL-P202V)
• After removing the monitor from the rack stand, store the
stand so that the screws will not be lost.
nLL-P202V
Pen writing position
Place the monitor on a table or other level surface.
1. Hold the flap by the depression on the back of the
monitor and pull the flap up.
Depression
2. Place the monitor where you want to use it.
Horizontal position
Place the monitor on a table or other level surface.
Caution
• When using the monitor horizontally, use the horizontal tab
in the upright position.
1. Lift up the two tabs on the back of the monitor.