Conceptronic Media Titan Manual De Instrucciones página 39

ENGLISH
The Media Titan needs to be configured when you turn it on the first time.
• Select the correct input channel on your TV where the unit is connected to. (HDMI, or Composite).
Note: From this point, the manual is based on the fact that your TV is set to the input channel of the
Media Titan. All steps described are related to the operation of the Media Titan.
Connect the power supply to the Media Titan if you have not connected it in chapter 5.1.
The Media Titan will now startup.
Note : During the startup procedure of the Media Titan, the screen can stay black. During this procedure,
the blue LED on the front of the Media Titan will burn. When the LED turns off, the loading screen
will appear on the Media Titan.
[ Loading ]
Note : The total loading process can take up to 90 seconds.
When the loading screen disappears, the initial setup wizard will be shown on your screen.
You can make selections in the setup wizard by scrolling the wheel or by pressing up or down on the
navigation wheel. You can confirm your selection by pressing the wheel.
• Select your language.
• Select your country.
• Select your timezone.
• Enter the current date and time. You can switch between the fields on your screen by pressing left and
right on the wheel.
• Select your TV aspect ratio.
• Enable or disable parental control.
• If you have enabled parental control, select your parental rating.
• Set a secret access code.
• Enter a secret question, in case you have forgotten the secret access code.
• Enter the answer to your secret question.
The initial setup is now complete and the Media Titan will show the Main Menu on your screen.
You can now proceed with chapter 7 for the basic Media Titan operation.
6. First-Time Configuration
39
[ Setup Wizard ]