Conceptronic Media Titan Manual De Instrucciones página 56

ENGLISH
TV : Change the TV settings
• Time record margins
• Channel search
• External antenna
Video/photo : Change Video/photo settings
• Video parameters
• Slideshow parameters
General : Change the general Media Titan settings
• Country
• Language
• Date and Time
• Access and protections
Connection : Change the TV output settings
• HDMI/YUV output resolution Set the HDMI output resolution.
• Composite output
• HDMI sound
• Automatic Framerate
• SPDIF sound
• Aspect ratio
Network : Change the network (Ethernet or Wifi) settings.
• Configure connection
• Connection
Advanced : Advanced Media Titan settings
• Box reset
Version : Media Titan version info
Show the software version, serial number or Copyright information of the Media Titan.
Set the amount of extra recording time just before and just after the
program so that you do not miss the beginning or the end.
Choose between scanning only free channels, or free and pay channels
and start a new channel scan.
When an internal antenna is used, the Media Titan will boost the
reception of the antenna to find more channels.
Set the default audio track for video files.
Set the default transition for photo slideshows.
Set your country.
Set your language.
Set the correct date and time, or set it to automatic to receive the
correct date and time through the DVB-T signal.
Enable or disable parental protection.
Set the Composite output setting.
Enable or disable sound through HDMI.
Enable or disable Automatic Framerate for video playback.
Set SPDIF sound to 5.1 or stereo output.
Set the aspect ratio of your TV.
Configure your Ethernet or Wifi connection.
Show the network connection details.
Reset the Media Titan to the factory default settings.
Note : When you reset the Media Titan to the factory default settings,
only the settings are erased. The data on the Harddisk will not
be deleted.
56