Conceptronic Media Titan Manual De Instrucciones página 60

ENGLISH
13.2 USB Host connectivity
The Media Titan is equipped with 3 USB host ports: 1 on the front panel and 2 on the back panel.
You can connect USB storage devices to these USB host ports to browse, play, or copy the files.
When you connect an USB storage device to any of the USB host ports of the Media Titan, the Media Titan
will quickly index the USB storage device and show a popup message that a new device is plugged.
Note : If the USB storage device contains many files, it can take a little while before the Media Titan has
indexed the files.
Note : If you connect a USB Harddisk without powersupply to the Media Titan, it is possible that the
Harddisk is not detected. In that case, connect an external power supply to the USB Harddisk to
provide extra power.
When the Media Titan has showed the recognition popup, your USB storage device will be listed in the
Music section and Video/Photo section. Through these sections, you can browse, play or copy the files to
the Media Titan.
[ USB Connection Popup ]
Copy files to your Media Titan
To copy files from your USB storage device to your Media Titan, follow the steps below:
• Mark the files on your USB storage device with the
• Go to the location on your Media Titan where you want to store the files.
• Press the
(hand) button to open the options menu and select "duplicate marked items".
The files are now being copied to the Harddisk of the Media Titan.
Tip : With the steps above, you can also copy data from your Media Titan to an USB storage device.
[ USB Device in Navigator ]
(marker) button.
60