Service; On Screen Navigation - Urrea UBORVI Manual De Usuario

accordance with these instructions, taking into
account the working conditions and the work
to be performed.
• Use the electrical device and accessories in
accordance with these instructions, taking into
account the working conditions and the work
to be prformed.
• NEVER use this instrument for medical use.
• Use of the electrical device for operations
different from those intended could result in a
hazardous situation.
• Is recommendable to use a safety device suit-
able, such a thermal and diferential switch
when you are using an electric equipment.

SERVICE

• Tool service must be perfomed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
• When tool service is required, use only identi-
cal replacement parts and follow the instruc-
tions from Maintenance Section in this manual.
The use of unauthorized parts or failure to fol-
low Maintenance Instructions may cause a risk
of electric shock or injury.
ATTENTION
Only use this instrument as indicated in this
instruction manual. No warranty will be appli-
cable in case of misuse of the instrument. We
will not be liable for consequences inherent to
damage.

ON SCREEN NAVIGATION

OPENING SCREEN
When the device is powered on, the first opening
screen shows you the device is booting up. Once
the product is fully powered up, the screen will
automatically switch to the live-video screen.
Figure 1 - OSD
E N G L I S H
LIVE-VIDEO SCREEN
The live-video screen is set default in this de-
vice. You can zoom, adjust LED brightness and
take images and video from this screen.
Figure 2 – Live-Video Screen
ADJUSTING LED BRIGHTNESS
Pressing the LED (+) button or LED (-) but-
ton on the keypad (in live-video screen) will
increase or decrease the LED brightness. It is a
9 steps pressing to increase and decrease the
LED brightness.
Figure 3 - Adjusting LED
ZOOM
The camera has a 5X digital zoom up function.
Simply press Zoom button at the rear enclosure
while in the live screen to zoom out the image.
A zoom indicator numbering will be displayed
on the left bottom corner of the screen as you
press the Zoom button.
Figure 4 – Adjusting Zoom
SYSTEM SETUP
While in the Live-Video Screen, pressing the
dual function key – the 'POWER' button that is
a 'MENU' function in Live-Video Screen.
Pressing the MENU button, the system setup
screen will show on the screen. Press the MODE
button at the rear enclosure will take you back
to the Live-Video Screen.
PRIMARY OPERATION AND SETTING
Operating by using Softkey on the bottom of the
screen align with the buttons on the enclosure.
U s er's Manu al
11