Safety Instructions And Warnings; First Aid Rules - Piusi P 3.5 Instalación Uso Y Mantenimiento

Installation, use and maintenance
3.

SAFETY INSTRUCTIONS AND WARNINGS

Preliminary
Before proceeding, make sure you can install the product in a ventilated
checks before
area, free from hazards for operators and equipment.
installation
Maintenance
Before carrying out any inspection or maintenance operations, always shut
control
off the air and discharge the pressure from the circuit by following the
decompression and draining procedure.
Prohibitions
4.

FIRST AID RULES

Contact with
In the event of problems deriving from INJECTION, INHALATION,
the product
INGESTION or contact of the handled product with the EYES or SKIN,
consult the respective SAFETY DATA SHEET.
Hazardous fluids and toxic fumes can cause serious or fatal injuries.
6
/112
WARNING
Poor ventilation, naked flames and sparks can give rise to hazardous
conditions, and cause fires, explosions and serious injuries.
The device is NOT anti-explosive type.
The device must be installed outside areas at risk of explosion.
Do not install in areas where inflammable vapors may be present.
Make sure that hoses are not routed close to high-traffic areas, sharp
edges, moving parts or hot surfaces. Use hoses within a temperature range
of -40°C to +82°C.
WARNING
It is strictly forbidden to hold or transport the system by means of the hoses
connected to it.
The device is designed to pump fluid at high pressures. Directing the flow
towards any part of the body is strictly prohibited and may cause severe
injury.
M0352 rev.01 EN