Manual Auger Load; User Menu 2 - Bio Bronpi CAROL-MIXTA Instrucciones De Instalación, Uso Y Mantenimiento

Program
Daily
Weekly
Week-End
• DAILY PROGRAMME: in this option, we can select the time we want the stove to be ignited and turned off. For the seven days a
week (Monday to Sunday) there are 3 possibilities. The time is introduced by pressing button P3, choose de desired time with buttons
P4 and P5 and save the programming with button P3, you will be able to set the time by increasing or decreasing it in fractions of 15
minutes. To activate the time section you must press P2 to activate the black led at the left of the start hour.
• WEEKEND PROGRAMME: it is possible to choose between "Monday to Friday" and "Saturday and Sunday". There are 3 possibilities
for each period:
Program
Daily
Weekly
Week-End
• The time is introduced by pressing button P3, choose de desired time with buttons P4 and P5 and save the programming with button
P3, you will be able to set the time by increasing or decreasing it in fractions of 15 minutes. To activate the time section you must press
P2 to activate the black led at the left of the start hour.
12.4.5.

MANUAL AUGER LOAD

If during the operation of the stove, it runs out of fuel, in order to avoid any
problem during the next ignition, it is possible to carry out a preload of
pellet of the auger during a maximum time of 600 seconds when the stove
is switched off and cold and the door is closed. A long press of key P2
starts the preload. On display are shown the seconds of the load passed.
In order to interrupt the load, press any key.
Before proceeding with a new ignition of the stove, do not forget to empty
the burner in order to avoid a dangerous situation.
12.5.

USER MENU 2

In order to access the user menu 2, it is necessary to keep pressing (3 seconds at least) the button P3 of the display.
The following table describes the structure of the user menu of the stove. In the attached table, only the options available to the user are
specified.
In order to move inside the submenus, it is necessary to press the buttons P4 and P5 and then validate with button P3 in order to enter into
each submenu. In order to modify the values, use the keys P4 and P5 to increase or decrease the value. To exit from the submenu press
button P1 to the submenu that you want or to go out to the start screen.
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Daily
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Program
Daily
Weekly
Week-End
Week-End
Mon-Fri
Sat-Sun
Weekly
Mon-Sun
ON
09:30
00:00
00:00
Manual auger load
ON
OFF
38
Daily
Monday
ON OFF
09:30 11:15
00:00 00:00
00:00 00:00
OFF
11:15
00:00
00:00
Week-End
Mon-Fri
ON OFF
09:30 11:15
00:00 00:00
00:00 00:00
CAROL-MIXTA