Settings; Info; Contrast; Tone - MACHEREY-NAGEL NANOCOLOR VARIO Mini Manual De Instrucciones

6. Settings

By pushing one of the buttons (
the button. The individual levels of the settings menu are displayed by the respective
icon in the upper left corner of the display. In the settings menu you can switch between
the individual submenus with help of the buttons
selected submenu is called up.

6.1 Info

By selecting the info menu
is displayed:
Serial No: NVM 0001
Firmware: V 1.000
Bootloader: V 1.0
With you get back to the settings menu.

6.2 Contrast

In the contrast menu
increases the contrast while the
the new settings. Pushing
saved via the button are not adopted.

6.3 Tone

The signal tone can be switched on or off in the submenu sound
tivation is done via the

6.4 Power supply

The currently used power source of the NANOCOLOR
menu power supply
warning appears when the battery power is low. Starting a heating program is then not
possible anymore. The heating block can be operated with the supplied mains adaptor
or with a connection cable (REF 919938) for usage in a car
respective symbol for power supply must be chosen via the keys
firmed with . Via
Note: When using the NANOCOLOR
make sure that the capacity of the car battery is sufficient (max. heating power 60 W).
28
, or
, the system information of the NANOCOLOR
, the contrast settings of the display can be changed. Pushing
button reduces it. Confirming with
leads back to the settings menu. Changes which were not
button. Pushing
. When the heating block is used with an external battery, a
you get back to the settings menu.
® VARIO Mini via the connection cable for the car,
NANOCOLOR VARIO Mini V 1.0 / 01.16
®
), the settings menu can be accessed via
and . With the
leads back to the settings menu.
VARIO Mini is selected in the
®
button, the
VARIO Mini
®
saves
. Activation or deac-
. In this case, the
and and con-