Rack Mounting (Optional) - Juniper Networks NETSCREEN-5GT ADSL Guía De Usuario

R M
ACK OUNTING
With a NetScreen-5GT ADSL rack-mount kit, you can mount one or two NetScreen-5GT
ADSL devices in a standard 19-inch equipment rack. The NetScreen-5GT ADSL rack-
mount kit includes installation instructions and a rack-mounting tray. The dimensions of
the tray are as follows:
In addition to the NetScreen-5GT ADSL device(s), rack-mount kit, and equipment rack,
you also need the following:
• Phillips-head screwdriver
• Four screws that match the thread size of the equipment rack
To mount the device in a rack:
1. Use the Phillips-head screwdriver to remove the two screws from the underside
of each NetScreen-5GT ADSL device that you intend to mount. The screws are
located on the underside of the NetScreen-5GT ADSL near the front panel.
(Keep the screws for use in the next step.)
Remove the screws.
2. Insert the NetScreen-5GT ADSL devices on the rack-mount tray and screw them
to the tray with the screws that you removed in step 1.
Insert the devices
on the tray.
Screw the devices
to the tray.
NetScreen-5GT ADSL
(O
PTIONAL
Width: 48.26 cm
Height: 4.013 cm
Depth: 33.655 cm
)
19 in.
1-5/8 in. (1 rack unit)
13-1/4 in.

Rack Mounting (Optional)

9