Inrush Current - Klein Tools CL900 Manual De Instrucciones

ENGLISH
MAX/MIN
When the "MAX/MIN" button
the Maximum and Minimum values as the meter continues to take
samples.
1. When measuring, press "MAX/MIN" button
the Maximum value (MAX) and Minimum value (MIN). If a new
Maximum or Minimum, the display will update with the new value.
2. Press "MAX/MIN" button
normal measuring mode.

INRUSH CURRENT

Rotate the Function Selector switch
and press INRUSH
current. While the meter monitors current waiting for the inrush
event, "----" will be visible on the display.
NON-CONTACT VOLTAGE TESTING
Press and hold the "NCV" button
integrated non-contact voltage tester. Approach the conductor under
test leading with the sensing antenna
warning signals via the LED indicator
when AC voltage is detected. Release the "NCV" button to exit NCV
testing mode.
NOTE: It is not recommended to perform continuity and NCV testing
simultaneously, as both tests utilize the same audible signal, making
it difficult to resolve which test is responsible for the audible alarm.
NOTE: Only voltages of 90V AC or greater will be detected.
8
FUNCTION BUTTONS
is pressed, the meter keeps track of
8
8 for more than one second to return to
prior to an inrush event to test for inrush
10
13
to toggle between
8
to the Current A
2
to test for AC voltage using the
. The meter delivers visual
14
and audible signals (beeps)
15
setting