SMA LIGHT 360 Manual De Usuario página 7

TYPES OF TREATMENT
2
1
Depending on the type of light mounted, the appliance automatically selects the correct functional
mode.
HR for Epilation Mode (Hair Removal)
SC for Photo Rejuvenation Mode (Skin Care)
RA for Acne Mode (Remove Acne)
1) HR MODE - EPILATION
Inserting the HR Light (yellow optical filter color), D Light 360 automatically activates the
Epilation mode and shows HR on the status display. In HR mode, you can choose between
5 power levels and whether to operate a single or sliding flash. The wavelength of
this light is between 510nm ~ 1200nm and specifically hits hair follicles.
2) SC MODE - PHOTO REJUVENATION (SR)
Inserting the SR light (orange optical filter color),D light 360 automatically activates
photorejuvenation mode and shows SC on the status display. In SR mode, you can choose
between 5 power levels and whether to operate a single or sliding flash. The wavelength of
this light is 560nm, specifically treats blemishes such as skin discoloration, small thin wrinkles,
grayish/off color and stimulates the production of new collagen that replenish the skin, improves
texture and overall tone.
3) RA MODE - ACNE (AC)
Inserting the AC light (Red optical filter color), D Light 360 is automatically activated in
Acne mode and shows RA on the status display. In AC mode, you can choose between 5 power
levels and whether to operate with single or sliding flash. The wavelength of this light is 430mm,
specifically kills bacteria causing acne, also dried heat of the pulsed light accelerates healing.
9
HOW TO PREPARE THE TREATMENTS
Before starting treatments, prepare the treatment area by thoroughly cleaning the skin and remove
makeup. Hair must be shaved with a razor or a hair clipper, it is preferable to use a clipper as you
immediately obtain an optimal length of 1mm, and maximizes the absorption of pulsed light (in
3
epilation treatment), using the clipper will also avoid any skin irritation.
Given that the pulsed light is absorbed by dark colors, it is necessary to protect small, dark
birthmarks and tattoos, cover it with white eyepencil makeup, or with a specific product like the D
Light Patch Pro.
SELECT ENERGY LEVEL
It is always advisable to begin at the lowest energy level and gradually increase to find the right
intensity according to your own tolerance. The energy level is selected by repeatedly pressing the
ignition button (9) after the machine has been started.
As the enegry level increases, so does the results, as well as the risk of possible side effects.
Do not let the pulsed light pass on large or irregular areas! In
the presence of doubt, ask your dermatologist before initiating
treatments!
Do not use the appliance on naturally dark
complexion or on tanned skin!
Do not use the pulsed light on varicose veins and any type of skin
lesions
If blistering occurs on the skin, or if you feel burning,
IMMEDIATELY STOP using the device.
10