Cleaning And Maintenance - Proline PGH4FGL-FR Manual De Instrucciones

simmering.
If the control knobs are difficult to turn, please contact your local service centre.

CLEANING AND MAINTENANCE

Always turn off the gas valve and disconnect the hob from the mains socket
before any cleaning or maintenance operation is carried out.
The hob is best cleaned whilst it is still warm, as spillage can be removed more easily
than if it is left to cool.
Hob top
Regularly clean the hob top using a soft cloth well wrung out in warm soapy water.
Avoid the use of the following:
household detergent and bleaches;
impregnated pads unsuitable for non stick saucepans;
steel wool pads;
bath/sink stain removers.
When cleaning the hob top, make sure that no water flows inside the burner caps, as
this may block the injectors.
Pan supports, burner caps and crowns
The pan supports, burner caps and crowns can be removed for cleaning.
Clean them using hot soapy water and remove marks with a mild paste cleaner. If the
marks are particularly difficult to remove, a well moistened soap impregnated steel
wool pad can be used with caution.
After cleaning, be sure to wipe dry with a soft cloth and to re assemble the parts
correctly.
Ignition sparker and thermocouple
The holes and grooves must be clean for the flame to ignite properly.
If the ignition sparkers are dirty they will not light properly. Clean them regularly using
a small non wire brush. The ignition sparkers must not suffer any serious impacts.
The thermocouples are extremely important since they cut gas supply in case a flame
goes out during cooking; be sure to keep them clean.
Maintenance
Periodically check the gas connection pipe. Even if any simple abnormality is felt,
inform the technical service to have it changed. We recommend the gas connection
parts to be changed once a year.
14