Testing - SCHOLTES LTE S3 XL60HZ Instrucciones De Uso

Fig. 5-34
Fig. 5-35
Before securing the dishwasher to the adjacent units,
attach the gaskets to the sides. Remove the adhesive
band on the gasket (see fig. 5-36).
Fig. 5-36
Fix the gasket to the dishwasher, inserting it in the seat
on the sides towards the front (see fig. 5-37), and making
sure that the long side of the gasket, the one with the
hole for inserting the screw, is attached to the outside of
the dishwasher; the hole in the long side must match the
hole in the dishwasher (see ref. A fig. 5-38). Make sure
the gasket adheres perfectly to the dishwasher.
Fig. 5-37
Fig. 5-38
Fig. 5-39 shows the state of the dishwasher after the
above operations are performed.
Fig. 5-39
Tighten the supplied screws with a screwdriver; this
operation definitively fixes the dishwasher to the
adjacent units; cover the side holes using the supplied
plugs (ref. A fig. 5-40).
Fig. 5-40

5.4 Testing

After installation, test the dishwasher by starting a work
cycle. Check for leaks and make sure the appliance
does not malfunction.
EN
15