Wet Cleaning - Panasonic ES-WD94 Instrucciones De Operación

Wet cleaning

Epilation head/Shaver head
1. Lift the frame, fast/gentle/beginner caps upward while
holding the frame release rib [B3]/the cap release rib
[CDE7] or remove the frame by pushing the frame
release button [H].
2. Apply liquid hand soap to the discs and the
blades.
3. Turn the switch on and then wet the discs and
the blades to create foam.
4. Wash the head with water to wash out
hair.
• Do not use hot water.
• If soap is not completely washed away,
then a white deposit can accumulate
and prevent the discs and the blades
from moving smoothly.
5. Turn the switch off, wipe the appliance
with a dry cloth and dry it well.
12
ES-WD94_AM.indb 12
Foot care head
1. Apply liquid hand soap to the central part of the file.
2. Pour a small amount of water on the file and turn the
switch on.
3. Rinse any debris thoroughly with water or
lukewarm water.
2
3
4. After turning the switch off, remove
the frame and rinse inside.
4
5. Wipe with a dry cloth
and dry in a well‑
ventilated location.
3
4
5
2011/12/16 19:12:37