How To Use The Stretcher In An Optimal Way; Setting Up The Stretcher - Easybabykit Baabi Manual De Instrucciones

Instructions manual
3

HOW TO USE THE STRETCHER IN AN OPTIMAL WAY

3.1. SETTING UP THE STRETCHER

Before you start, please note that you need at least two people to set up the stretcher correctly:
1. Place the stretcher folded vertically and hold it between two persons. One must press the base
to the floor with both feet to avoid sliding of the stretcher.
2. The other person must press the spring buttons of the lower legs and pull upwards until a click is heard.
3. Subsequently, the same person must press the spring buttons of the upper legs and the other
one must pull again upwards until it clicks.
4. Then, the person holding the base, must also hold the upper legs. The other one must press both
side spring buttons and must fold up the legs until it clicks again.
5. Equally fold up the lower legs until they click.
6. Screw the 4 safety rings gently.
7. Finally, place the orange fastener located on both sides of the center part and lay the stretcher on
the floor while checking its correct position, as well as checking the position of the spring buttons
and that the safety rings are screwed. The stretcher is ready for use.
1
5
2
6
3
7
4
29