Dismantling The Stretcher; Fabric Assembly - Easybabykit Baabi Manual De Instrucciones

Pediatric stretcher

3.2 DISMANTLING THE STRETCHER

To dismantle the stretcher, the inverse procedure is to be followed:
1. Remove the orange fasteners from the center of the stretcher.
2. Then, unscrew the 4 safety rings.
3. While one person holds the stretcher, the other one presses the side spring buttons at the
center of the stretcher and folds up the lower legs.
4. Press the side spring buttons at the center of the stretcher and fold up the upper legs.
5. Press the spring button of the upper legs and pull downwards.
6. Finally, press the spring button of the lower legs and pull once again downwards. The stretcher
is now dismantled. Please note that in these two last steps, one of you will be holding the stretcher
and the other one will be dismantling it. The person holding it, may help dismantle in occasions.

3.3. FABRIC ASSEMBLY

Once the structure is set up and stands on the floor:
1. Face the sewn part of the fabric by one end of the frame.
2. Pull the fabric until it adjusts correctly to the other end.
3. Seal the velcros, first the lower ones, then the side ones.
4. Finally, make sure that the velcros are sealed correctly and that the contact surface is whole.
1
3
30
2
4