Use Of Iontodry; Placement Of The Device And Body Position; Connections - Driosec Iontodry Manual De Uso

Maintenance treatment - 2 options:
1) At the first sign of return of sweating, start again the series of
treatments to gain control on sweat. It normally takes a shorter
period than in the initial treatment.
2) Alternatively, sweat can be controlled by performing 1 or 2
treatments of ½ hour per week continuously.

3. Use of iontodry

3.I. Placement of the device and body position
In case of hands treatment, place the control and treatment units on
a table or surface comfortably accessible while sitting down. The
surface must be flat and fixed, otherwise the water will probably
spill.
In case of feet treatment, the treatment units should be placed on
the ground.
In order to comfortably use iontodry
seated position. Position yourself at a height that allows you to carry
out the treatment, either in your hands or feet, in a comfortable way.
3.II. Connections
The two cables (between the control and treatment units) are
connected via 3.5 mm inputs located at the front of each module. Both
cables have two male snaps, making irrelevant which one goes to each
unit.
®
USER MANUAL
, it is recommended to hold a
®
EN
43