Overview; Technical Data; Protection Class; Power Supply - Resol KM2 Manual De Instrucciones

1

Overview

• Internet access to the system data via VBus.net
• Comfortable system parameterisation via the RESOL RPT Parameterisation
Tool possible
• Suitable for all RESOL controllers with VBus
• WLAN functionality
• Software updates
Easy installation in only three steps

Technical data

Housing: plastic
Protection type: IP 20 / EN 60529
Protection class: III
Ambient temperature: 0 ... 40 °C
Dimensions: 95 × 70 × 25 mm
Mounting: wall mounting (optional)
Display: operating control LED
Interfaces: RESOL VBus
® for the connection to the RESOL controller, 10/100
Base TX Ethernet, Auto MDIX, WLAN 2.4~2.4835 GHz
WLAN encryption: WEP, WPA / PSK, WPA2 / PSK
Power consumption: < 1.75 W

Power supply:

mains adapter: 100 – 240 V~, 1A / 12 V ⎓ , 1 A (Level 6)
communication module: 12 V ⎓ , 120 mA
electrical energy source: ES1 (EN 62368-1)
electrical power source: PS1 (EN 62368-1)
thermal energy source: TS1 (EN 62368-1)
mechanical energy source: MS1 (EN 62368-1)
24
®
Use mains adapter in dry interior Mains adapter protection class: II
rooms only.
2

Included

1
2
3
If one of the items mentioned below is missing or defective, please contact your
distributor:
1 KM2 Communication module, mains adapter and VBus
2 Interchangeable mains adapter plugs (EURO, UK, USA, AUS)
3 Network cable (CAT5e, RJ45), 2 m
4 Wall plugs, screws and rubber pads
Manual (not illustrated)
Coaxial connector polarity:
internal: plus
external: minus (GND)
4
cable pre-connected
®