Assembly - Truper LAGAS-2800 Manual De Instrucciones

Assembly

• Set the wheels set passing axis (A) through each wheel (B)
and its respective mounting orifice (C) into the chassis. Secure
axis with the pin (D).
• Insert the chassis posts (E) in the handle posts and
lower until securing with the integrated pins.
• Install the high-pressure gun supports (F) in the chassis
using the screws set included.
• Connect the metallic spear (G) into the high-pressure gun
(H); and the high-pressure gun ( I ) and the latter onto the
pump connection ( J ). All these joints are threaded and
shall be tightened treading in a clockwise direction.
• Close completely the water inlet for the garden hose (K).
Connect the garden hose to the garden hose inlet (L). To
connect and prevent the hose to twist turn the
connection knob.
CAUTION • To prevent from losing pressure use
care not to strip out the connections threads.
• Once the connections are set and WITHOUT any
nozzle (M) in the metal spear open fully the garden
hose faucet. Press the high-pressure trigger until
constant water flows out from the metal spear. This
step is to purge the water system off air bubbles.
• If using detergent to work with the Pressure
Washer, add detergent into the deposit (N) connect
the black nozzle in the metal spear.
G
M
K
Double check there are
no leakage in the hose
J
L
E
F
N
H
Untangle and straighten all the hoses in
full to prevent twists cutting the water flow
F
Pins
D
B
A
C
I
ENGLISH
7