Gear Lever - MV Agusta RIVALE 800CC Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

3.6.

Gear lever

The N (neutral) position is indicated by the warning light
on the instrument panel.
To change into first gear, push the lever down.
To change into second gear, lift the lever up. Lifting the
lever up repeatedly engages all the other gears in suc-
3
cession up to the sixth speed.
"Quick Shift" function
The Rivale 800 model is equipped with a "Quick Shift"
gear change system; this device enables you to upshift
without pulling the clutch or changing the throttle control
angle. This way, it is possible to change into upper gears
by keeping a constant acceleration and reducing shift-
ing time to a minimum. The "Quick Shift" system is not
available when you change gear with the clutch lever
pressed or at a speed lower than 30 km/h, nor when
shifting into lower gears.
CONTROLS AND INSTRUMENTS
- 24 -
WARNING: When you are riding the
vehicle with the engine revving
high in a low gear, changing gear
without operating the clutch lever
can cause abrupt reactions which
can compromise the stability of the
vehicle. MV Agusta recommends
to operate the clutch lever in these
circumstances, especially when
the engine rpm is close to the rpm-
limiter intervention speed.
3

Hide quick links:

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

F3 675 2013F3 800 2013

Tabla de contenido