4.6.
Glove compartment
Insert the key.
Push the seat downwards at the back and at
the same time turn the key in a anticlockwise
direction.
Lift up the seat at the back end, let it slide back-
wards and make it rotate as shown in the figure.
In order to reassemble the above mentioned part,
you must perform the following operations:
•
Rotate the key into the lock
•
Press down the seat
•
Release the key
•
Press down the seat once more, so to
make sure of its firm coupling to the frame.
WARNING
Every time you lift the seat and every
time the vehicle is used, make sure that
the above mentioned part is correctly
placed and that it is firmly secured to the
motorcycle framework.
OPERATION
- 77 -
4
4