Craftsman 172.64120 El Manual Del Propietario página 7

KNOWYOUR CORDLESS DRILL/DRIVER (Fig.2)
i
OTE: Before attempting to use this product, familiarize yourself with all operating
features and safety rules.
Fig. 2 TorqueAdjustmentCollar Bubble Level
KeylessChuck
]
Transformer
Trigg
LED Light
Forward/Reverse
Selector Switch
with Power
Lock-Off
Latch to
Release
Battery
Pack
2 Double Ended
Red BatteryPack Screwdriver Bits
Light (1 on each side)
Safety, performance and dependability have been given top priority in the design of this product,
making it easy to maintain and operate.
This Cordless Drill/Driver has the following features:
1. Variable Speed 0-650 RPM (no-load speed) match high-torque driving and high speed
drilling to bit and material used in a variety of job applications. Increase pressure on trigger
switch for higher speed, decrease pressure for lower speed. Reversible to remove fasteners.
12
This Cordless Drill/Driver has the following features cont.:
2. Forward / Reverse Power Lock-Off Switch conveniently located for easy operation.
3.3/8=in. Keyless Chuck hand tightens bits fast and secure without chuck key. Provides
positive retention of 1/16-in. to 3/8-in. shanked bits.
4.23 Plus 1 Position Adjustable Torque Clutch adjusts to automatically stop bit rotation at
desired torque setting to prevent overdriving screws. One locked position for drilling.
5. Electric Brake stops bit rotation instantly when trigger is released. Ideal when driving
screws, nuts, and bolts.
6. Bubble Level helps provide accurate right angle drilling and driving straight into workpiece.
7. Ergonomic "T" Handle Design with molded in comfort grip provides maximum control,
added balance and gripping comfort.
8. LED Light illuminates drill / drive area for hands-free lighting in any application.
9. Fan=cooled motor provides the torque and power needed for a variety of drilling and
driving applications.
10. Durable impact=resistant housing helps protect tool from damage and reduces weight.
11. The Nickel=Cadmium battery pack recharges in 3 to 6 hours under normal use.
12. Charging Stand/Transformer has LED Lights. Green indicates power On, Red indicates
when battery is charging
13. includes: 2 double-ended screwdriver bits and storage/carrying bag for easy carrying
and storage of drill/driver, saw and accessories.
Drill No. 64120, in Kit 11518:
Chuck
Motor
Switch
No Load Speed
Clutch
Torque
Charger input
Charge Rate
3/8-in. keyless
18.0 Volt DC
Variable Speed
0-650 RPM
23 + 1 Position
Max. 160 in.-Ibs
120V, 60Hz AC
3 to 6 Hours
13