Range Control - Kenmore 911.36655 El Manual Del Propietario

OPERATION
Clock,TimerandOvenControl
PROGRAM CLOCK /
CANCELS BAKE, STMUS TIMER
BROIL OR DISPLAY DISPLAY
CLEAN OPERATION
TEMPERATURE FUNCTION UP ARROW PAD
DISPLAY DISPLAY (|NCRF-.ASES TIME
OR TEMPERATURE)
PRESS TO TURN SET AUTOMATIC
TIMER ON AND OFF OVEN OPERATIONS
Your range is controlled with a touch. You
now have the ease of setting the following
operations:
CLOCK
BAKE
BROIL
DELAY CLEAN
TIMER
DELAY BAKE
CLEAN
The UP or DOWN arrow is used to set
an amount of time or change the tem-
perature you want to use. By pressing
and holding down either pad the num-
bering will change quickly. By pressing
and releasing either pad the numbering
will change slowly_
Once you have programmed your con-
trol for any operation, you can display
the setting by pressing the appropriate
pad. For example, if you are using the
TIMER and want to see the time of
day, press CLOCK° The display will
show the time of day
DOWN ARROW PAD
{DECREASES TIME
OR TEMP,_IATURE)
III ,,,_
You cannot set BAKE, 1
BROIL or COOK TIME
while the oven door is
in the locked position.
If you try, the word"DOOR" |
wdl appear in the dzsplay. The |
oven door lock is to be used |
for Self.Cleariing only. j
The end-of-cycle tone will sound at the end of
timer use and automatic oven functions. The
end-of-cycle tone is 3 short beeps followed by
1 beep every 6 seconds that repeat unlil you
press any pad except the UP or DOWN
arrow pad° If you would like to eliminatethe
repeating beeps, push and hold CLEAR/
OFF for ten seconds. To return lhe ! beep
every 6 seconds, push and hold CLEAR/
OFF for 10 seconds.
If the time display beeps continuously and
flashes an "F" followed by a number, you
have a function error code. Note the
number after the "F"_ Press CLEAR/
OFF. Allow oven to cool for 1 hour. If
problem repeats, disconnect all power to
the range and call for service. Advise your
service technician of the number following
the "F" in the display.
10