Chapter 4. Installing And Operation - Hiti P530D Manual De Instrucciones

Chapter 4. Installing and operation

◎ Connect the Power cord
Connect the power cord which is conformed to safety regulations below.
: Make sure to switch off the power of the printer before connecting to AC power.
: Do not insert or remove the power cord with wet hands. It may cause the electric
leakage.
: Do not damage or make any modification to the power cord. Misusing, such as putting
the heavy items on the power cord, giving a strong pull to the power cord and twist the
power cord may cause the fire and electric shock.
: When moving the printer, make sure to switch off the power of the printer, remove the
power cord in order to have no connection with other devices. Otherwise, the power
cord might be damages and it can cause the fire and electric shock. Also, it is very likely
to fall down caught by the cord.
: For the safety consideration, please remove the power cord from the printer and AC
power if the printer is not to be used for a long time.
4.1 Connect the printer power cord to
the back of P530D (as figure shown) and
AC power receptacle.
10