Alesis VIRTUE AHP-1 Guia Del Usuario página 16

Each track icon can have one of the following record statuses:
•
If the track icon is flashing, this means the track is ready to record. If a recording
already exists on this track, it will be overwritten.
•
If the track icon is on, this means the track will playback while recording, however it
will not be recorded to.
•
If the track icon is off, this means the track will be muted during recording, and it will
not be recorded to.
To select which tracks that you would like to record to, Press the Track 1, Track 2, or Track 3
buttons to change their status accordingly. After you have selected which tracks you would
like to record to, start playing the keyboard, or press the Start/Stop button to begin the
recording.
Once you have finished recording, press the Record button to end the recording. The
recording will start to play immediately after you have finished recording. To stop the
playback, press the Start/Stop button.
If you would like to record to a different track of the song, press the record button twice to re-
enter the Record Ready page, and select the new track accordingly.
TIP: While you can exit and return to the record mode to change things like your Voice and
Style settings, it is helpful to have these set before entering record mode.
TIP: If you plan on using the Auto Chord or Full Range Chord features in record mode, make
sure that you enable it after entering record mode.
TIP: If the internal recording memory is full, the recording will stop and store the song.
"Rec_Full" will be shown on the display.
Clearing Tracks and Songs
To clear a track, enter the Record Ready page, and then hold the record button. You will then
see a "Delete?" message appear on the screen.
After this has appeared, use the Track 1 – Track 3 buttons to make the track icon appear for
the track or tracks that you would like to delete, then press the + button to confirm deletion.
Alternatively, press the – button to cancel this function.
To delete the full song, clear all 3 tracks at once using this feature.
To clear all 3 user song slots at once, hold the Record and Song buttons while powering on
Virtue.
16