Installation; Connecting The Piping - Friedrich MD12Y3JM Manual De Instrucciones

Installation

[Wall-mounted Type]

Connecting the piping

1. Pull the screw cap at the bottom of the in-
door unit
2. Remove the chassis cover from the unit by
loosening screws
3. Pull back the tubing holder.
4. Remove pipe port cover and positioning
the tubing
5. Indoor unit installation
1) Hook the indoor unit onto the upper portion of
the installation plate.( engage the three
hooks at the top of the indoor unit with the
upper edge of the installation plate) Ensure
that the hooks are properly seated on the in-
stallation plate by moving it left and right
2) Unlock the tubing holder from the chassis
and mount between the chassis and installa-
tion plate in order to separate the bottom side
of the indoor unit from the wall
Indoor unit back side view
Tubing holder
Right
Backwards
Installation plate
Installation Manual 13
Installation
Chassis cover
Pipe Port
Left
Tubing Holder