Wired Remote Controller Installation - Friedrich MD12Y3JM Manual De Instrucciones

Wired remote controller installation

Since the room temperature sensor is in the remote controller, the remote controller box should be
installed in a place away from direct sunlight, high humidity and direct supply of cold air to maintain
proper space temperature. Install the remote controller about 5ft(1.5m) above the floor in an area
with good air circulation at an average temperature.
Do not install the remote controller where it can be affected by:
- Drafts, or dead spots behind doors and in corners.
- Hot or cold air from ducts.
- Radiant heat from sun or appliances.
- Concealed pipes and chimneys.
- Uncontrolled areas such as an outside wall behind the remote controller.
- This remote controller is equipped with LCD. display. For proper display of the remote controller
LCD's, the remote controller should be installed properly as shown in Fig.1.
(The standard height is 4~5 ft (1.2~1.5 m) from floor level.)
FAN
SPEED
TEMP
OPER
MODE
no
yes
FAN
SPEED
TEMP
OPER
MODE
no
FAN
SPEED
TEMP
OPER
MODE
5feet
(1.5meters)
[Fig.1]
FAN
SPEED
TEMP
OPER
MODE
Installation Manual 23
Installation