Cleaning, Maintenance And Repair - Stihl connected Box Manual De Instrucciones

English
► Insert the power adapter in a properly installed and
fused wall outlet.
► Install the power adapter with a ground fault circuit
interrupter (30 mA, 30 ms).
WARNING
￭ Overvoltage can occur in the power adapter if the line
voltage or frequency are incorrect during operation. The
power adapter may be damaged.
► Make sure that the mains voltage and the mains
frequency of the power supply or the voltage
transformer in a vehicle match the data on the rating
plate of the power adapter.
￭ A carelessly laid cable may be damaged and cause others
to trip or fall. People may be injured and the STIHL
connected Hub or power adapter may be damaged.
► Position and mark cables so they do not represent a trip
hazard.
► Route the cable so that it will not be damaged, kinked or
crushed, or chafed.
14
￭ If wiring and pipes are laid in the wall, they may be
damaged if the STIHL connected Hub is mounted on the
wall. Contact with wiring can result in electric shock. This
may result in serious injury to people and damage to
property.
► Make sure there is no wiring or pipes in the wall at the
proposed mounting site.
￭ If the STIHL connected Hub is not mounted on the wall as
described in this User Manual, the STIHL connected Hub
may move, fall down, or overheat. Persons may be injured
or property damaged.
► Mount the STIHL connected Hub on the wall as
described in this User Manual.
￭ If the STIHL connected Hub has not been professionally
installed in the vehicle, vehicle components may be
damaged. Persons may be injured or property damaged.
► Observe the vehicle manufacturer's mounting
instructions.
► Applicable national installation regulations are
observed when connecting the charger to the vehicle
supply system.
3.6

Cleaning, Maintenance and Repair

WARNING
￭ There is a risk of an electric shock if the power adapter is
not removed from the wall outlet during cleaning,
maintenance or repair operations. This may result in
serious injury to people and damage to property.
► Disconnect the power adapter from the power supply.
￭ Aggressive cleaning agents, cleaning with a jet of water or
pointed objects can damage the STIHL connected Hub or
the power adapter. If the STIHL connected Hub or the
power adapter are not cleaned correctly, components may
no longer function properly or safety devices may be
rendered inoperative. They may cause serious injury to
persons.
► Clean the outside of the STIHL connected Hub with a
dry cloth.
► Clean vents with a paintbrush.
3 Safety Precautions
0458-199-9921-A