Changing The Settings; Mounting The Stihl Connected Hub - Stihl connected Box Manual De Instrucciones

English
► If the configuration page in the Internet browser does not
open automatically: Scan the code shown on the package,
or call up the configuration page in the address bar of the
Internet browser: http://stihl.connectedbox:80.
Setting up Internet access via the configuration page
► Follow the instructions on the configuration page and set
up the Internet access.
As soon as the STIHL connected Hub is connected with
the Internet, the system checks for updates and does a
restart.
Re-establishing the connection with the remote network of
the STIHL connected Hub
As soon as the "operating status" and "connection status"
LEDs emit white light again:
► Scan the QR code once more with your smartphone.
► As a alternative, manually establish a connection with the
remote network of the STIHL connected Hub.
► If the configuration page in the Internet browser does not
open automatically: Scan the code shown on the package,
or call up the configuration page in the address bar of the
Internet browser: http://stihl.connectedbox:80.
Establishing a STIHL connected user account
► Follow the instructions on the configuration page and
establish the STIHL connection user account.
► Finish the setup of the STIHL connected Hub.
As soon as the "operating status" and the "connection
status" LEDs emit green light, the setup of the STIHL
connected Hub is completed.
Adding the STIHL connected Hub to the STIHL connected
portal 7
► Call up the STIHL connected portal at
https://connect.stihl.com, log in with your personal access
data and add the STIHL connected Hub.
4.3

Changing the Settings

The configuration page of the STIHL connected Hub can
also be called up at a later time to change for example the
radio network of the type of Internet access.
16
5
6
4 Preparing the STIHL connected Box for Operation
► Briefly press the Reset button.
The radio network of the STIHL connected Hub is
established. As soon as the "operating status" and the
"connection status" LEDs emit white light, the STIHL
connected Hub is ready for setup.
4
► Scan the QR code with your smartphone.
The connection to the remote network of the STIHL
connected Hub is established automatically.
► As a alternative, manually establish a connection with the
remote network of the STIHL connected Hub.
The access data is indicated on the rating plate.
► If the configuration page in the Internet browser does not
open automatically: Scan the code shown on the package,
or call up the configuration page in the address bar of the
Internet browser: http://stihl.connectedbox:80.
► Make the settings and confirm to complete.
The STIHL connected Hub returns to operating mode.
4.4

Mounting the STIHL connected Hub

► Disconnect the mains plug from the power supply.
► Select a location within radio range of the compatible
STIHL products.
Mounting the STIHL connected Hub on a wall
► Check the following points when mounting the STIHL
connected Hub on a wall:
– Suitable fixing materials.
– The STIHL connected Hub is horizontal, the connectors
face down.
– The following dimensions are observed:
– Distance between all sides of the STIHL connected
Hub to other objects and surfaces min. 100 mm
– Distance of the bare holes = 100 mm
– Diameter of the screw head = 6.5 mm
– Diameter of the screw shaft = 3 mm
– Distance of the screw head bottom to the wall = 2 mm
Mounting the STIHL connected Hub to a cap rail
► Fasten the STIHL connected Hub to a cap rail.
0458-199-9921-A