MP3 files are highly compressed pieces of music. The amount of data of the original audio
material is reduced by 1/10 of the original size using a special process. This enables you to fit up
to 10 hours of music on a single CD.
These music CDs can be played using this Recorder.
As a rule, a recording is made at the current position. This is similar to a video tape, e.g. in the
middle of the tape. By holding down the REC/OTR n button, the recording will be made at the
end of all other recordings. This helps avoid overwriting previous recordings.
New recordings on a DVD+R will always be added after the end of all recordings.
The DVD Recorder can play DVDs and CDs. DVD+Rs and DVD+RWs made using this DVD
Recorder can be played in most current (and future) DVD players.
This is a standard from Dolby Laboratories for the transmission of 5.1 channel sound. This
acoustical playback system is used to transmit five full channels. In addition, one channel is used
exclusively for low frequencies (effects). Speakers are positioned at front left, center, and front
right, as well as rear left and right. This is currently the most common system, used in movie
theaters.
This DVD Recorder records each sound in two-channel Dolby Digital on a DVD+RW.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
This product incorporates copyright protection technology that is protected by US patent
numbers 4631603, 4577216, 4819098, and 4907093, as well as other intellectual property rights.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and
is only intended for home use and other pay-per-view applications. Macrovision must provide
written authorization for any other use. Changes to the device, reverse engineering, or
disassembly is prohibited.
Simple programming system for DVD recorders. Simply enter the code associated with your
television program. This number is located in your television listings magazine.
VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation. The
VCR Plus+ system is manufactured under license from Gemstar Development Corporation. US
patent Nr.: 6,466,734; 6,430,359; 6,091,882; 6,049,652; 5,335,079; 5,307,173
In order to identify your machine for service questions or in the event of theft, enter the serial
number here. The serial number (PROD. NO). is printed on the type plate fixed at the rear of
the recorder:
MODEL NO.
MRV640/17
PROD. NO.
..................
Introduction
9