Recording Without Automatic Switch-Off - Magnavox MRV640 Manual De Instrucciones

Recording without automatic switch off
1
Turn on your TV. Select the channel number for the DVD
Recorder (Audio/Video In or channel 3 or 4).
2
Insert a disc to be used for the recording. 'READING' will appear
on the display.
a Index display
b A DVD+RW was inserted that already contains recordings. Use
A and B to select a location where the new recording should be
started.
a 'EMPTYDISC' appears in the display.
b The inserted disc is empty.
a A dialog box appears asking if the contents should be erased
or the disc should be ejected.
b The inserted disc is a DVD+RW whose contents are not compatible
with DVD Video (e.g. a data disc). This disc cannot be used for
recordings
REC/OTR n button.
a 'Title limit' appears on the screen when a recording is
attempted.
b A disc can only contain a maximum of 48 titles (including the empty
titles). Erase some titles or change the disc.
3
If necessary, switch to TV programming by pressing the
MONITOR button on the remote.
4
Use CHANNEL+ or CHANNEL- to select the channel you
want to record. The following will appear on the display at right:
Channel number of the external inputs:
SVHS jack (Y/C) S-VIDEO (Y/C) Video jack (CVBS) VIDEO
'EXT2'
(CVBS) , Audio jack L AUDIO R for SVHS-jack and Video
jack.
Switching between S-VIDEO (Y/C) and VIDEO (CVBS) is
done automatically.
Component Video jacks on the back COMPONENT VIDEO Y
'EXT1'
PB PR , Audio jacks L AUDIO R for Component Video
'CAM1' Video/Audio front jacks A/V VIDEO / L AUDIO R
46
until the entire disc is erased using the
Problem
Tip
1 FREETITLE P01
Recording