3 year guarantee
To be returned with the device if defective.
LEITZ devices are sold with a 3 year guarantee.
The conditions of the guarantee period of 3 years are as follows:
1. Each device is guaranteed against all defects in material and/or
workmanship for a period of 3 years from the date of purchase.
2. No device will be accepted without written notification from the
customer giving details of the problem that has occurred, and proof of
the date of purchase.
3. All devices for repair are to be returned to Esselte with adequate
packaging. No liability will be accepted by Esselte for goods damaged
in transit from the customer, due to inadequate attention to packaging.
4. The supplier will be responsible for all parts and labour charges
as necessary to the device. The 3 year guarantee is subject to the
following conditions:
a) That the device has been used strictly in accordance with the
operating instructions supplied with the device.
b) That if the benefit of this guarantee is sought, the device must
be returned, carriage paid to Esselte. Esselte does not accept
responsibility for loss or damage in transit.
c) That the guarantee is invalid if the defects are found to be
caused by accident, misuse, alteration or neglect.
d) That no liability of Esselte is to be implied here for damage, loss
or expense of any kind resulting from, consequence upon, or
in any way due to any fault whatsoever in the instrument or its
accessories.
e) That this guarantee does not affect you statutory rights as a
consumer.
In order to allow fast and smooth processing in case of a guarantee
claim, please register at: http://www.leitz.com/lamination
Date of Purchase:
Model No. Serial No.:
Company Name:
Contact person:
Address:
Telephone/Fax No:
ESSELTE UK Ltd.
Waterside House, Cowley Business Park,
Uxbridge, Middlesex,
UB8 2HP
UNITED KINGDOM
Tel.: 0870 9090609
Fax: 01895 878901
Esselte Ireland Limited
Westlink Industrial Estate,
Kylemore Road,
Dublin 10
IRELAND
Tel: +353-1-6268438
Fax: +353-1-6269798
www.esselte.ie
Disposal of old equipment
This symbol of a crossed out waste bin on a
product, its packaging and/or accompanying
documents means that the product is subject to
the European directive 2002/96/EC as well as
national law for implemention of the directive.
Directive and law prescribe that electrical and electronic
products must not be disposed of with household waste.
The customer must dispose of the product by delivering it
to a designated station for collection, treatment and recy-
cling of waste electrical and electronic equipment.
The correct disposal of your old appliance is free of charge
and will help prevent potential negative consequences for
the environment and human health.
For more information about disposing your old appliance,
contact your city office, waste disposal service, or the
shop where you purchased the product.
Specifications
Working mode/Heating system
Laminating speed
Pre-heat time
Automatic switch-off
Recommended pouch thickness
Max. thickness of laminated item
Maximum working width,
Power supply
Power consumption,
Net weight
Dimensions (W x D x H)
Enclosure material
Subject to technical changes without prior notice.
6-roller, 4 of them heated,
carrierless
Automatic by thickness sensor
(max. 1900 mm/min)
about 5 min
after 30 min
80(75)–250 µm
1 mm
320 mm
230 V AC
600 W
6.3 kg
525 x 217 x 143 mm
ABS
9