Bartscher STM3 Instrucciones De Uso página 47

Whisk
1. Put the retaining flange (14) of
whisk (13) on the quick coupling (2)
of device body (1).
2. Tighten the whisk (13) to the quick
coupling (2) of device body (1).
3. To disassemble (e.g. for cleaning) the whip
(a) pull it until it becomes loose on the
retaining flange (b).
In order to assemble the whip, insert the
whip base (a) on the retaining flange bolts
and press firmly.
The disassembly shall be performed according to the above mentioned description,
but in the reverse order.
Wall holder
•
Practical wall holder allows for motor block
storage in easily accessible place while
saving space.
•
Fix the wall holder in accessible place
with use of appropriate expansion bolts
(not included in the delivery).
•
Put the motor block into the wall holder
(fig. on the right).
2
13
1
14
b
a
- 43 -