Specifications - Welch Allyn 9600 Plus Manual De Instrucciones

Directions for Use

Specifications

Power
Requirements
Current
Power
Consumption
Calibration Tester
Power Pack
(approximate
dimensions)
Environment
Operating
Specifications
Heating and
Cooling Times
Tested at an ambient
of 23.9°C (75°F)
Installation Category II
Pollution Degree II
Weight (without Power Pack): 0.75 kg (1.65 lbs)
Height (with plug inserted): 62 mm (2.44")
Storage Temperature: 0°C – 50°C (32°F – 122°F)
Ambient Operating Temperature: 18.3° C to 26.7°C (65° F to 80° F)
Operating Humidity: 20% to 95% RH. Non-Condensing
Controlled Temperature of 9600 Plus
Intermediate Setting: 38.5
Temperature Accuracy: ±0.05° C (0.1
Maximum Pressure/Altitude: < 2000 meters.
Room Temperature to Low Setting: Approximately 20 min.
Low Setting to Intermediate Setting: Approximately 6 min.
Intermediate Setting to High Setting: Approximately 6 min.
Cool from High Setting to Low Setting: Approximately 25 min.
Chapter 4 Maintenance
Voltage: 100 - 240 V 50/60 Hz
Heating: 480 mA
After Warm-Up: 185 mA
Heating: 2.4 W
After Warm-Up: 0.92 W
Length: 254 mm (10.00")
Width: 105 mm (4.13")
Height: 85 mm (3.34")
Length: 86 mm (3.38")
Width: 51 mm (2.00")
Weight: 0.18 kg (0.40 lbs)
o o
Low Setting: 36 C (96.8
o o
C (101.3
o o
High Setting: 41 C (105.8
o
31
F)
F)
F)
F)