Removing The Blade - EGO POWER+ LM2130SP Manual Del Operador

REMOVING THE BLADE

WARNING:
the cutting edges with rags or other materials when performing any maintenance on
the mower blade. Always remove the battery pack when servicing or transporting the
mower.
NOTICE:
The following tools are
required for replacing the blade:
◾
9/16" (14mm) wrench
◾
Torque wrench
◾
Manual screwdriver or metal rod with
a diameter less than 5/16" (8mm)
◾
Manual screwdriver or metal rod with
a diameter of 1/4" (6.35mm) or less.
1. Stop the motor; remove the battery
pack from the mower.
2. Turn the mower on its side.
3. While wearing protective gloves, place a metal rod (e.g., a 3.5" length screw bit)
with diameter less than 5/16" (8mm) into the fixing hole to act as a stabilizer
(Fig. 21).
4. Use a 9/16" (14mm) wrench to turn the outer bolt counterclockwise to loosen it
(Fig. 21).
38
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC
Always protect your hands by wearing heavy gloves or wrapping
21
Stabilizer