EGO POWER+ LM2130SP Manual Del Operador página 46

REPLACING THE WHEELS
(Fig. 33a, 33b, 33c & 33d)
WARNING:
the battery pack when servicing or
transporting the mower.
1. Turn the mower on its side with
the upper surface against a wall.
2. Use a flat-blade screwdriver to
pry the dust cover away from the
wheel.
3. Use an adjustable or 1/2"
(13mm) wrench to turn the bolt
counterclockwise to loosen it.
4. Remove the bolt, the worn wheel,
and the wave washer from the
wheel axle.
NOTICE:
◾
When replacing the rear wheel
for the self-propelled mower
(LM2130SP/LM2130SP-FC),
remove the drive gear from the
worn wheel and assemble it to the
new wheel with the 3 screws.
46
56-VOLT LITHIUM-ION CORDLESS LAWN MOWER — LM2130SP/LM2130SP-FC/LM2130/LM2130-FC
Always remove
33a
Front wheel for LM2130SP/LM2130SP-FC/
LM2130/LM2130-FC
33b
Rear Wheel
Drive Gear
Wave Washer
Rear wheel for LM2130SP/LM2130SP-FC
33c
Rear wheel for LM2130/LM2130-FC
Dust Cover
Bolt
Round Recess
facing outside
Front Wheel
Wave Washer
Wheel Axle
Dust Cover
Bolt
Round Recess
facing outside
Screw
Wheel Axle
Dust Cover
Bolt
Round Recess
facing outside
Rear Wheel
Wave Washer
Wheel Axle